Commodity common sense- - iron line handicraft- - primary production technological process

One, cut into parts linear

The intent reachs a way:

Head the length that if hold the intact that circles iron line,reduces demand.

The practice is iron the line is put in sharp machine, press length set of the regulation, so that the machine is cut into parts actively,cut.

1mm of ≤ of requirement measure accident; 1 ℃ of wire radian ≤

2, curved casing

The intent reachs a way:

Head if will be linear classics formerly,the circle is made after this one working procedure or square or the appearance of all sorts of example demand.

The practice is to use one iron plate or wood to provide set measure, the worker bends the appearance of demand by fixed measure.

3, to solder

The intent reachs a way:

The iron that bends sure appearance encircles its from beginning to end to had not joined, it is to solder from beginning to end solder is together namely.

The practice is the from beginning to end iron line has soldered without space land namely.

4, spot welding

The intent reachs a way: Iron line handicraft has more solder place, short iron line and the basket that each coil solder together, its provide what some many solder nod to solder the process is spot welding namely.

Number of the coarse adjustment archives that should recuperate electric current alertly in handling a process, fine tuning and weld time, solder the stand or fall of quality and this process is having bigger connection.

5, burnish

The intent reachs a way:

When solder, when will short line and coil solder, outside can exceeding short line solder the circle sometimes, burnish is some abrasion that will exceed.

Use grind providing is the hand is ground machine, can use the machine that reduce a limit sometimes, the principle is identical, advertent is to cannot maul wire.

6, polishing

The intent reachs a way:

When iron basket is soldering, the place in solder mouth because firepower or additional cause, its outside luminosity is met not very aspiration, what machine appearance of storage rack smooth is polishing namely.

The hand when polishing hold the advertent force of iron line basket should be not regular meeting collect, want to use sure strength, cast basket appearance stealthily smooth cast slippery.

7, eletroplate, the lacquer that bake

Explain: Had soldered and already cast lubricant and rear but outside hair, when eletroplating, cannot have register dot, yellow drop, become angry, too thin wait for idea.

8, bind glue, adhesive plaster

The intent reachs a way:

Every needs to bind glue or the storage rack of adhesive plaster just has this process.

The quality that storage rack should admit first before binding is not had be short of, wait for bad idea without solder of sealing off, leakage, empty solder, false solder, bind on adhesive plaster head if for storage rack more beautiful.

Bound course wants advertent glue or adhesive plaster is taut pull solid, but cannot tighten too.

9, check, pack

Need to check have:

1, storage rack does not prick a hand

2, film is bright lustre, lacquer layer is even

3, standard, measure, colour accords with demand

4, handicraft is not had be out of shape

5, makes written guarantee weaving is essential, essential

After each prove eligibility, the box that is careful to press commodity demand surely installs a quantity to undertake seal box and be packinged.

Article chapter comes from: Www.onsonhardware.com