Onson Hardware
24hoursOnline Service
Location:Home » Articles » 4 Point For Bathroom Decoration

4 Point For Bathroom Decoration

Return News ListAuthor:ONSON Views:155Post Time:1/23/2018 4:18:41 AM

The bathroom renovation is the most complex, smooth and security requirements of the waterway and the circuit is very high, and the requirements of space material slip, moisture proof, bathroom decoration if the two repair is very troublesome, so the first decoration decoration is good, Xiao Bian today with everyone who study the bathroom decoration elements!

First, the choice of bathroom materials

Bathroom materials selection should be less cloth, solid wood, etc., and more choice of anti-corrosion, rust, waterproof and breathable properties of good material. In particular, the ceiling, to choose breathable and moisture resistant materials, because the bathroom water vapor and wetlands are likely to lead to deterioration or even decay.

1 old baby and family, to choose the anti slip tiles, such as surface rough pattern or raised floor tile.

2 if you want to replace the bathroom tiles, brick chisel to the original post, before leveling the ground with cement mortar, then do waterproof processing.

3 general bathroom walls to do about 30cm high waterproof paint, to prevent water penetration wall.

4 if the bathroom wall is not load-bearing light body wall, the whole wall will be covered with waterproof paint.

5 if you use the two type of shower screen, the two sides of the wall must be covered with waterproof paint.

6 if the use of the bathtub, and adjacent to the wall of the bathtub, the height of the waterproof material is higher than the height of the bathtub.

Two, the space layout of the bathroom

The toilet, in a limited space, put the toilet, bathtub, basin, but also to do dry separation, clean, easy to use, with good ventilation, the bathroom space layout is put forward higher request.

1, the basin independent, to keep away from the bathroom door and the bathroom door, into a relatively dry space.

2 bath area if you can not make a closed, it is best to hang the shower curtain, in order to prevent water splashing.

3 larger bathrooms can be dry areas, with waterproof wallpaper, both to moisture, but also to make more space.

4 the floor of the toilet should be left with a tilt angle, in order to achieve the purpose of drainage as soon as possible.

5 bathroom door, as far as possible to set a high threshold, to prevent the flow of water to the outside.

Three, the height of the toilet

Bathroom equipment needs to be installed at the right height, too high or too low are not easy to use, to reduce the comfort of life.

1 the height of the shower head is between 205-210cm.

2 platform height of about 80cm, the width of not less than 50cm.

3 the height of the mirror, the bottom should not be less than 90cm, the top can not be more than 200cm.

4 the washing machine should be placed on the width should not be less than 60cm.

Four, toilet and ventilation

Toilet water taste, do not cut, this is a very common problem in the bathroom. In fact, this is a great relationship with the design and construction.

1 adjustable slope is bad easy water. The floor drain is generally 2% of the slope, but most of the time the actual slope only 1%, this is mainly on account of the appearance effect of adjustable slope laying floor tiles.

2 if the bathroom did not design windows, then at least it should install an exhaust fan, so that the space to keep dry.

3 in the bathroom after the construction is completed, the toilet must be blocked, do "waterproof test", check the surrounding walls and the ground there is no leakage phenomenon. This is the key to ensure the quality of waterproof engineering.

Bathroom is an integral part of life, it is a very practical function of the place, but also one of the focus of home decoration. At the same time, the quality of the bathroom renovation is also very particular!


Recommended Reading

Recommend Products

The Latest News

Hot News

Online Service
What can I do for you?